|TITANIUM Motorsports |
"POS Cobra" Restoration Journal
Titanium Motorsports Racing Journal
Parts & Stuff
Motorsports "POS" Mustang Cobra Restoration Journal|
|#55: October 12th, 2011 - Installing the New Cobra Front Bumper Cover & Miscellaneous Small Parts...|
was waiting on the upper front suspension mounting parts to come back
from powder-coating, so I started to clean, paint, bolt-on and
trial-fit many of the parts that go under the hood and elsewhere on the
car. The bolts, nuts, u-nuts and brackets were all blasted to remove
any old paint and rust. Some of the parts were treated to a chemical
rust-remover bath also. All parts were then give a coat of etching
primer, and then top-coated with a 2K Urethane or Duplicolor Enamel
last couple of pictures above are the parts that were powder-coated.
The solid motor-mounts are for the race car. Before I bolted on the
front suspension, I went ahead and bolted the header panel, Styrofoam
bumper absorber & new bumper cover into place.|
All images are property of Titanium Motorsports and may not be used without permission.
Last Modified: November 10th, 2011.